General Information Devices with no native wireless support can be easily integrated into a wireless LAN (WLAN) using the HP 501 Wireless Client Bridge. The HP 501 Wireless Client Bridge can bridge up to 15 Ethernet client device running a legacy networking protocol to the WLAN, extending wireless network access to a wide range of protocols. An integrated serial to TCP/IP converter enables a RS-232 asynchronous terminal device to communicate with a compatible station on the network. Strong enterprise-class layered security features, including an IEEE 802.1X supplicant, protect the network from intrusions. Technical Information Wireless LAN Standard: IEEE 802.11ac ISM Band: Yes UNII Band: Yes ISM Minimum Frequency: 2.41 GHz ISM Maximum Frequency: 2.47 GHz UNII Minimum Frequency: 5.18 GHz UNII Maximum Frequency: 5.83 GHz Total Number of Antennas: 3 Number of External Antennas: 3 Antenna Gain: 2 dBi Antenna Type: Dipole Antenna Antenna Connector: RP-SMA Connector Wireless Transmission Speed: 1.27 Gbit/s Wireless Security: WPA2 WPA WEP AES TKIP EAP TLS PEAP Features: Quality of Service (QoS) Features: MIMO Technology Interfaces/Ports Ethernet Technology: Ethernet Ethernet Technology: Fast Ethernet Ethernet Technology: Gigabit Ethernet Number of Network (RJ-45) Ports: 1 Network (RJ-11): No HDMI: No Audio Line Out: No USB: No Powerline: No Management Port: Yes Management & Protocols Management: Web Based Management SNMP v2c, v3 MIB-II Physical Characteristics Form Factor: Wall Mountable Form Factor: Desktop Height: 5″ Width: 5.5″ Depth: 1.3″ Weight (Approximate): 2.01 lb Warranty Limited Warranty: Lifetime Product images may differ from actual product appearance.
HP 501 Wireless Client Bridge (J9835A)
$106.00