General Information APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager. Technical Information PDU Type: Switched Input Receptacles: 1 x NEMA L5-20P Output Receptacles: 24 x NEMA 5-20R Power Description Input Voltage: 120 V AC Output Voltage: 120 V AC Power Rating (VA): 1920 VA Input Current: 20 A Physical Characteristics Placement: Rack Rack Height: 0U Height: 70.5″ Width: 2.2″ Depth: 1.8″ Weight (Approximate): 14.37 lb Miscellaneous Package Contents: Switched Rack PDU Installation Guide Rack Mounting Brackets Safety Guide Serial Configuration Cable Environmentally Friendly: Yes Environmental Certification: WEEE Environmental Certification: RoHS Warranty Limited Warranty: 2 Year Product images may differ from actual product appearance.
APC AP8930 0U Switched 20A Rack PDU 2G w/ (24) 5-20R Outlets
$375.00