APC SUA500PDR-S 500VA Pnl Mnt UPS Hi Temp Btry

From the Manufacturer|Powered by    Is the information in this section helpful? Yes / No Product Overview SUA500PDR-S Features The Industrial Panel and DIN Rail AC UPS from APC by Schneider Electric offers protection from under voltage (sag) and over voltage (swell/surge), transients, spikes and unexpected power outages due to utility interruptions or problems within the facility. The small form-factor is optimized for mounting within control panel enclosures either on a heavy-duty DIN rail or directly to the wall of the enclosure. The UPS battery can be loaded in the internal battery compartment or mounted externally depending on local codes. Frequently used to protect Industrial Process Control equipment, this AC UPS can provide protected AC power to multiple AC/DC power supplies within the cabinet.  Industrial Features & Benefits Easy Maintenance User replaceable battery – safely and simply replaceable by end-user with easy front panel access to the battery compartment; technician not required Hot swappable battery – replaceable by end-user or service personnel while UPS is operating on utility power Battery replacement – perform as part of preventive maintenance or based on UPS notification when UPS Automatic Self-Test determines battery should be replaced Flexible Installation Small form factor – optimized for mounting within control panel enclosure either on heavy duty DIN rail or directly to the wall of the enclosure Hardwired AC Input/Output – connection easily accessed on front panel of UPS UPS battery installation – either insert into the internal battery compartment or mount externally depending on local electrical codes Chassis knockout – choose either right side or bottom knockout for flexible positioning of externally mounted battery Highly Available and Reliable Temperature compensated battery charging – prolongs battery life by regulating the charge voltage according to battery temperature Automatic self-test – runs periodically to ensure early detection of a battery that needs replacing – Default interval for self-test is 14 days Manageable LED Indicators – located on front of UPS provide status at a glance indicating On-Line, On-Battery, Battery-disconnected or needs replacement, UPS fault DB-9 serial communication port – uses RS232 protocol Integrated Dry Contact I/O – provides simple status information for On-Battery / Low Battery and user configured emergency power off (EPO) APC SmartSlot – accepts optional accessory cards for Network Management or Serial Modbus/Jbus or additional Relay I/O Dry Contacts – Integrated Dry Contact I/O is disabled when accessory card is installed Technical Specifications   Output Output Power Capacity 325 Watts / 500 VA Max Configurable Power 325 Watts / 500 VA Nominal Output Voltage 120V Efficiency at Full Load 94.0% Output Voltage Distortion Less than 5% Output Frequency (sync to mains 47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal Topology Line Interactive Waveform Type Sine wave Output Connections (1) Hard Wire 3-wire (H N + G) Input Nominal Input Voltage 120V Input Frequency 50/60 Hz +/- 3 Hz (auto sensing) Input Connections Hard Wire 3 wire (1PH+N+G) Input voltage range for main operations 82 – 144V Input voltage adjustable range for mains operation 75 – 154V Batteries & Runtime Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Included Battery Modules 1 Available Battery Module Slots 1 Typical recharge time 2 hour(s) Replacement Battery APCRBC135 RBC™ Quantity 1 Runtime Graph                               Communications & Management Interface Port(s) DB-9 RS-232, SmartSlot Available SmartSlot™ Interface Quantity 1 Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Surge Protection and Filtering Surge energy rating 540 Joules Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 Physical Maximum Height 5.84 inches (148 mm) Maximum Width 14.24 inches (362 mm) Maximum Depth 6.72 inches (171 mm) Net Weight 28.30 lbs. (12.86 kg) Environmental Operating Environment 32 – 104 °F (0 – 40 °C) Operating Relative Humidity 0 – 95% Operating Elevation 0-10000 feet (0-3000 meters) Storage Temperature 5 – 113 °F (-15 – 45 °C) Storage Relative Humidity 0 – 95% Storage Elevation 0-50000 feet (0-15000 meters) Audible noise at 1 meter from surface of unit 55.00 dBA Online Thermal Dissipation 90.00 BTU/hr Conformance Regulatory Approvals UL Recognized Standard Warranty 2 years repairs or replace Sustainable Offer Status RoHS Compliant REACH REACH: Contains No SVHCs Documents User Manual View User Manual PDF | Download User Manual PDF PDF, 142K, 14 pages Technical Information Plug/Connector Type: Hard Wire 3 wire (1PH+N+G) Receptacles: 1 x Hard Wire 3-wire (H N + G) Emergency Power OFF: Yes Power Description Load Capacity: 500 VA/325 W Input Voltage: 110 V AC Output Voltage: 120 V AC Interfaces/Ports Serial Port: Yes Total Number of Expansion Slots: 1 Battery Information Battery Characteristics: Maintenance-free, Sealed Battery Chemistry: Lead Acid Backup/Run Time (Full Load): 8 Minute Backup/Run Time (Half Load): 24 Minute Typical Battery Recharge Time: 2.50 Hour Physical Characteristics Height: 5.8″ Width: 14.2″ Depth: 6.7″ Weight (Approximate): 28.30 lb Miscellaneous Package Contents: Industrial Panel and DIN Rail UPS with Standard Battery 500VA 120V CD with Software Documentation CD Installation Guide Smart UPS Signalling RS-232 Cable Wall-Mounting Template 1 x Battery Module Certifications & Standards: UL 1449 Environmentally Friendly: Yes Environmental Certification: REACH Environmental Certification: RoHS Warranty Limited Warranty: 2 Year Product images may differ from actual product appearance.