Make sure this fitsby entering your model number. ã€PREMIUM MATERIAL】The HI/LO section of the pump is all aluminum and the end plates are cast steel. This hydraulic splitter is capable of good wear resistance, durable in use. The 2 stage hydraulic pump is excellent for uses in Presses, Log Splitters, Clamping Units and Compacto. ã€HIGH EFFICIENCY】This 2 stage pump with 3500PSI max pressure can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters 85% efficient. ã€MAIN PARAMETER】Shaft: 1/2″; Inlet port: 150mm / 5.9in; Outlet port: 230mm / 9.0in; Maximum pressure: 3000 PSI; Bolt circle: 2.83in.; 4 holes spaced 2″ on center; Mounting hole diameter: 344in; Woodruff key: 1/8in; Rotation is clockwise ã€NOTE】It requires the gasoline engine of at least 8hp or more and is only suitable for open center hydraulic systems. Presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. ã€EASY INSTALLATION】Equipped with 1/2″ pump shaft, the wood splitter is compatible with horizontal and vertical shaft engines. It greatly reduces the difficult problems encountered when replacing and operating products.
B091CP9F4X Hydraulic Log Splitter Pump 16 GPM Hydraulic Motor 2 Stage Hydraulic Wood Splitter Pump 3000PSI Log Splitters Parts with 1/2″ Shaft
$75.00
Category: 1dealsock