Crucial 16GB Kit (2 x 8GB) DDR3L-1600 Unbuffered Non-ECC UDIMM Memory

General Information DDR3L 240-pin DIMM Desktop modules that operate at speeds up to 1600 MT/s and have a CL11 latency. It is dual voltage and can operate at 1.35V or 1.5V. It is Unbuffered and is non-ECC. It conforms to the industry standard UDIMM layout of 240 pins and is compatible with computers that take DDR3 UDIMM memory. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules). To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a standard DDR2 DIMM socket or a DDR DIMM socket. The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins. Technical Information Memory Size: 16 GB Memory Technology: DDR3L SDRAM Memory Voltage: 1.50 V Number of Modules: 2 x 8 GB Memory Speed: 1600 MHz Memory Standard: DDR3L-1600/PC3-12800 Signal Processin Unbuffered CAS Latency: CL11 Device Supported: Desktop PC Physical Characteristics Number of Pins: 240-pin Form Factor: DIMM Product images may differ from actual product appearance.