Perle PSI-MOS-RS422/FO1300 E Transceiver/Media Converter 27085754

General Information The PSI-MOS-RS422/FO 1300 E Serial to Fiber Converter transparently connects 4-wire RS422/RS485 and INTERBUS devices to fiber optic cable. By transmitting serial data over optical fiber, these serial media converters provide an economical path to extend the reach of RS422 and RS485 devices. Long Distance Serial Data Transmission over Fiber Using the FO 1300 E Serial to Fiber Converter you can extend your serial data transmission up to 27km (16.7 miles) over multimode fiber or 45km (28 miles) over single mode fiber. The result is that any two pieces of asynchronous serial equipment, located miles apart, can communicate at full duplex over fiber optic cable at rates up to 2 Mbps. EMI, RFI and Transient Surge Immunity Another advantage of the FO 1300 E fiber optic transmission system is the electrically isolated connection of devices. Electromagnetic interference (EMI) is a common phenomenon in typical environments like industrial plants, warehouses and factory floors. This interference can cause corruption of data over RS422 or copper-based Ethernet links. Data transmitted over fiber optic cable however is completely immune to this type of noise, thus preventing the negative effects of voltage equalization currents and electromagnetic interference on the data cables. A Serial to Fiber Media Converter therefore enables you to inter-connect your serial devices over fiber ensuring optimal data transmission, increased availability of the system, and improved network design flexibility for point-to-point connections and star structures. Flexible Fiber Optic Connections The FO 1300 E operates at 1300 nm wavelength, using a separate LED emitter and photo-detector on SC type connectors. Almost any multimode or single mode glass fiber size can be used. Power Budget Considerations Calculating the power budget is critically important with planning the fiber optic link. The optical power budget is the amount of light required to transmit data successfully over distance through a fiber-optic connection. The amount of light energy available within the setup will dictate the length of the fiber optic cable run between serial media converters within the network. Optical power budgets are critical to help businesses avoid signal distortion. To learn how to calculate optical power budget read our technical note. Transmit and receive dBm can be found in the Hardware specifications. Transmit each serial signal out over 10 fiber optic lines Up to ten (10) Serial to Fiber Converters can be grouped together using the TBUS DIN Rail bus system for voltage and data. This allows the serial converter to operate as a star coupler, taking the serial data input signal and distributing it to all Fiber optic output ports. Interfaces/Ports Total Number of Ports: 2 Network (RJ-45): No DVI: No USB: No Management Port: No Number of SC Ports: 1 SC Port Type: Duplex Media & Performance Media Type Supported: Optical Fiber Fiber Mode Supported: Multi-mode Fiber Mode Supported: Single-mode Fiber Optic Wavelength: 1300 nm Maximum Distance Supported: 27.96 Mile Fiber Optic Cable Standard: 50/125 µm Fiber Optic Cable Standard: 62.5/125 µm Fiber Optic Cable Standard: 9/125 µm Power Description Power Source: Power Supply Physical Characteristics Form Factor: Rail-mountable Height: 3.9″ Width: 1.4″ Depth: 4.1″ Weight (Approximate): 6.73 oz Miscellaneous Package Contents: PSI-MOS-RS422/FO1300 E Transceiver/Media Converter 24VDC USA Wall Power Adapter Environmentally Friendly: Yes Environmental Certification: China RoHS Environmental Certification: RoHS Environmental Certification: REACH Country of Origin: Germany Warranty Limited Warranty: 1 Year Product images may differ from actual product appearance.